Nu Finish Once a Year Car Polish is a popular product known for its ability to deliver a long-lasting, protective shine when applied to automotive paint. With its unique formula that chemically bonds to painted surfaces, Nu Finish claims to keep car paint looking its best for up to 12 months with just a single application.
But are you worried about a complicated application process? Don’t worry, the beauty of Nu Finish lies in its simplicity—there’s no special application process, just regular steps that lead to an extraordinary shine.
In this guide, we’ll explain the easy and effective application of Nu Finish’s Once a Year Car Polish. So, without any further ado, let’s begin.
Preparation Prior to Applying Nu Finish Polish
Using Nu Finish is easy with some basic preparation and technique. Before applying Nu Finish Polish, you’ll want to properly prepare the car’s painted surfaces:
Step 1: Wash and Dry Your Car
Wash and rinse the vehicle thoroughly with a car wash soap using the two bucket method. This removes any dirt or contaminants that could interfere with polish application.
Completely dry the car using automotive microfiber drying towels. Do not apply polish to even slightly damp paint.
Step 2: Shake the Nu Finish Polish Bottle Well
Activate the magic within by giving the Nu Finish polish bottle a good shake. Shake the Nu Finish bottle vigorously for 60 seconds before use to combine ingredients. Proper mixing ensures you get the full benefit of Nu Finish’s protective formula.
Step 3: Add Your Own
Customize your pre-application routine with any additional steps specific to your car’s needs. Whether it’s a meticulous pre-wax inspection or a thorough surface assessment, make it your own.
Precautions:
- Work in a shaded area or when panels are cool to the touch.
- Avoid direct sunlight.
- Proper prep ensures the Nu Finish polish bonds directly to the clearcoat for maximum protection.
A Step-by-Step Guide to Applying Nu Finish polish
With the car surfaces prepped, using Nu Finish polish is simple:
Step 1: Apply a Small Amount of Polish to a Clean, Damp Microfiber Cloth
Less is more with Nu Finish. A small amount goes a long way. Apply the polish to a clean, damp microfiber cloth to kickstart the transformation.
Step 2: Work in Small Sections
Divide and conquer. Work in small sections to ensure thorough coverage and a uniform finish. Nu Finish performs its best when given the spotlight in manageable areas like approximately 2 x 2 foot sections.
Step 3: Apply the Polish in Circular Motions
Channel your inner artist and apply the polish in circular motions. This technique ensures even distribution, maximizing the protective effects of Nu Finish.
Step 4: Allow the Polish to Haze
Let the magic happen. Allow the Nu Finish Once a Year Car Polish to haze, signaling that it’s forming a shield that will keep your car shining for months to come. This takes around 5 minutes.
Step 5: Buff Off the Residue with a Clean, Dry Microfiber Cloth
With the haze in place, gently buff off the residue with a clean, dry microfiber cloth. Revel in the instant transformation, as your car emerges with a renewed luster. Inspect closely and reapply to any missed spots, then buff again.
Apply a second coat of Nu Finish polish within 30 days for increased protection. Avoid getting the polish on trim pieces.
Bonus Tips
- Tape off and mask any non-painted trim pieces like rubber, vinyl, or plastic to avoid staining.
- Work in a garage or shaded area when temperatures are below 85°F degrees for proper application. Direct sunlight or hot surfaces can interfere with the polish’s effectiveness.
- Gently hand apply using microfiber cloths only. Do not use a power buffer.
- Apply a second coat within 30 days for maximum gloss and a year of protection.
- Clean and dry the car’s surface before applying for best polish bonding.
- Do Not Use Nu Finish Polish on Vinyl, Plastic Trim, Wood, Rubber, or Flat Paint
Nu Finish Once a Year Car Polish lives up to its name in providing a lasting, protective gloss with just an annual application when used properly. It’s an easy way to maintain your car’s shine.
Summary
The key to unlocking Nu Finish’s potential lies in simplicity and precision. Wash, shake, apply, and buff—these fundamental steps lead to a protective shine that lasts. Nu Finish Once a Year Car Polish offers not just a transformation but a commitment to keeping your car glistening for the long haul.
FAQs
How Can I Use Nu Finish Once a Year Car Polish on a Car with a Matte or Satin Finish?
Nu Finish Once a Year Car Polish is not recommended for matte or satin finishes. It’s best suited for traditional paint surfaces. Ensure your car’s finish is compatible before application.
How Long Does Nu Finish Once a Year Car Polish Last?
Nu Finish’s protective effects can last for up to a year, as the name suggests. However, environmental factors and driving conditions can influence the longevity of the shine.
Can I Use a Power Buffer to Apply Nu Finish Once a Year Car Polish?
While hand application is recommended for precision, some users opt for a power buffer. But the accurate answer is – no, you should apply by hand using microfiber cloths only. However, if you choose this route, use a low-speed setting to prevent over-application and achieve an even finish.